|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 21 Feb 2012 16:18 from: alangdance click the date to link to this post click member name to view archived images |
Just finished (I think!!!) my 1st complete layout design with Templot. I have on ever designed single turnouts before. If anybody has any spare time could they look over it to see if it is OK and if there is any improvements that could be made. Regards Alan |
||
Attachment: attach_1365_1842_Pentland_Road_160212.box 237 | |||
posted: 21 Feb 2012 21:54 from: Ian Allen
click the date to link to this post click member name to view archived images |
Alan, Not too shabby. You need to have a look at the interlaced point though as the wing rails at the first crossing vee seem to be quite a way from the Vee. You also have part of a rail missing on the left hand turnout road. I'd change the V4 points at the top of the plan though, a 14" radius isn't brilliant ! Ian |
||
posted: 21 Feb 2012 22:55 from: alangdance click the date to link to this post click member name to view archived images |
Thanks for the comments Ian. Added missing rail. I found the short wing rail, I have increased it but it will not allow me to increase to the length I need. This is not a great issue as I can add the correct lenght when building. The point at the top is a med peco point which leads into a fiddle yard (I just the size point that came up when starting. Alan |
||
posted: posted: 21 Feb 2012 23:50 from: Ian Allen
click the date to link to this post click member name to view archived images |
Alan, I've just had a quick play with your plan. Tidied the interlaced point up and reduced your box file count too. Ian |
||
Attachment: attach_1368_1842_Pentland_Road_210212.box 209 | |||
Last edited on 22 Feb 2012 14:14 by Ian Allen |
|||
21 Feb 2012 23:50 from: Ian Allen
click the date to link to this post click member name to view archived images |
Martin, Problems uploading the box file, seem to have multiple posts without the attachment ! Ian |
||
Last edited on 22 Feb 2012 00:22 by Ian Allen |
|||
posted: 22 Feb 2012 13:46 from: Tony W
click the date to link to this post click member name to view archived images |
HI Alan. Agree with the above comments, also the timbering of the third crossing needs adjusting as the A chair at the crossing nose needs to cover more of the timber to match the other two. Tony. |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |