|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 18 Apr 2015 16:57 from: Nigel Fisher
click the date to link to this post click member name to view archived images |
Hi I'm building a layout for a competition launched by our club chairman. I'm looking for a supply of n gauge copperclad sleepers. Anybody know where I can get some? I've tried Marcway in Sheffield and they can't supply, although they are 'sending' me some strip for pointwork they have yet to appear despite promises on the phone. There is a fixed budget for the competition so cannot go joining the 2mmFS club. There would appear to be plentiful supplies of 4mm sleepers but not 2mm. Nigel Fisher |
||
posted: 18 Apr 2015 17:48 from: Jim Guthrie
click the date to link to this post click member name to view archived images |
Nigel, You might have to look at products from the US - like here http://www.kapplerusa.com/y2k/p-n-ties.htm The problem is that these are to North American standards with 9" wide ties, so might look a bit on the thin side in UK N scale. The price doesn't look too bad and compares favourably with the 2mm Society prices, but the postage might be a killer and you might be subject to import duty and VAT, depending on the amount of your order. Jim. |
||
posted: 18 Apr 2015 22:25 from: Rob Manchester
click the date to link to this post click member name to view archived images |
Hi Nigel, I just checked my stores and found a couple of part used packs of Marcway CCS2 which is labelled as 2mm Finescale sleeper strip. I purchased it in the closing down sale at the Wakefield Model Centre a while back. I have used bits of it for wiring feeds in buildings and even turnout tie bars in larger scales than 2mm. I would be a little worried about using it to produce 2mm trackwork as the width of the strips in each pack varies from 1.7mm to nearly 2.5mm. By my calculation ( and not being a 2mm scale person ) plain track sleepers should be 1.65mm wide and turnout timbers 2mm wide so it is anybody's guess which the packs are intended for. I do seem to remember Marcway and possibly even SMP when they were down in Warwick selling bags of pre-cut sleepers for 2mm scale plain track so I would guess the longer strips are for turnouts. What quantity of track are you looking to make for the layout ? Regards Rob |
||
posted: 21 Apr 2015 19:17 from: Nigel Fisher
click the date to link to this post click member name to view archived images |
Hi Thanks to those that replied to my enquiry. I have now sourced enough for most if not all of the sleepers I need. As it happens from Marcway. I normally work in EM gauge and have done for the last 30 years, but this is a chance to try something different. I have now built aTandem/3 way point in 3 gauges, EM (of course), 5inch and now 9mm and all off templot drawings! Nigel Fisher |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |