|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 19 Dec 2009 21:01 from: NeilD click the date to link to this post click member name to view archived images |
Martin, Back in the depths of time (19/08/01), you posted a file: "File : /Martin_odds_and_ends/s4p4_ds_8_on_1524mm.box Uploaded by : 85amod@... Description : P4 double-slip/switch diamond 1:8 on 1524mm (60") radius. Inner slip radius 37". Outer slip radius 158". Timber spacings per BRT. Slip switches eased to 1:36 planing because of the sharp curve. Select as a group and use the notch-linked functions to position. You can access this file at the URL "http://groups.yahoo.com/group/templot/files/Martin_odds_and_ends/s4p4_ds_8_on_15 24mm.box" Unfortunately, this link no longer exists and I'd really like to use the template. Is it still available somewhere? Neil |
||
posted: 19 Dec 2009 21:40 from: Martin Wynne
click the date to link to this post click member name to view archived images |
NeilD wrote: Martin,Hi Neil, That's going back a bit. It would have been created in an old version of Templot without the option of half-diamond templates, which would have been done as customized turnout templates instead. No doubt I deleted it when half-diamonds were added in later versions, as that file would no longer be properly representative of the Templot functionality. I should have it still somewhere in my backup files, but why would you want it? You can create a much better template using the latest 091c version of Templot. Put the first 1:8 half-diamond on the 1524mm radius, and then follow the slip tutorial at: http://www.templot.com/martweb/pug_slips.htm regards, Martin. |
||
posted: 16 Jan 2010 17:21 from: NeilD click the date to link to this post click member name to view archived images |
Martin, I tried the tutorial and ended up with a very nice looking template which bears very little relation to what I actually wanted. I would like to reconstruct an old trackplan which got lost when upgrading computers (from a PC to a Mac - the trackplan went out with the destroyed PC Hard-drive). If you find the time and can trawl through your backups and find it, I'd be most grateful. Regards, Neil Martin Wynne wrote: NeilD wrote:Martin,Hi Neil, |
||
posted: 16 Jan 2010 17:25 from: NeilD click the date to link to this post click member name to view archived images |
Martin, Sorry, lost the body of my original mail: trying again... Back in the depths of time (19/08/01), you posted a file: "File : /Martin_odds_and_ends/s4p4_ds_8_on_1524mm.box Uploaded by : NeilD wrote: Martin, |
||
posted: 16 Jan 2010 17:57 from: Martin Wynne
click the date to link to this post click member name to view archived images |
NeilD wrote: If you find the time and can trawl through your backups and find it, I'd be most grateful.Hi Neil, It will be quicker to do it again. It takes only about 5 minutes to do a slip. As it's 1:8 on a curve I think it ought to be a switch diamond, as before. I will do it now -- hang on. regards, Martin. |
||
posted: 16 Jan 2010 17:59 from: NeilD click the date to link to this post click member name to view archived images |
Thanks Martin, It might only take you five minutes but it took me at least two hours spread over 3 sessions to follow the tutorial:-) !! Neil |
||
posted: 16 Jan 2010 18:55 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Hi Neil, Box file attached. P4 - DS8 - on 1524mm. 8ft-6in timbering. Movable K-crossings (switch-diamond). 1:40 switch planing (as C switches). Bullhead - common 14" middle timber. Minimum radius is 897mm (35") -- may need a little gauge-widening. Timbering is generic -- may need some slight shoving if you have a specific prototype. Full-size images are in the Image Gallery : 2_161352_100000000.png 2_161353_170000000.png regards, Martin. |
||
Attachment: attach_723_995_p4_ds8_1524mm.box 393 | |||
posted: 16 Jan 2010 21:06 from: NeilD click the date to link to this post click member name to view archived images |
Martin, Many thanks - much appreciated. Neil |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |