... bonded together. Thread lockers are Methlyacrylate and are typically of lower bond strength to allow later separation if required. It tends to be slower to cure than Cyanoacrylate glues. I have two bottles purchased decades ago (Locktite UK) kept in a draw and they still work perfectly. Regards Tony. posted: 18 Apr 2018 13:48 from: David R If you're working in 7mm scale then P1 slide chairs with a hole in the jaw and separate studbolts are available from Off The Rails. Some rendered images follow: 100_131353_300000000.jpg 100_180820_220000000.jpg 100_131349_560000000.jpg You will, of course, have to drill a series of 1mm diameter holes through each stock rail. And find a working tub of "superglue" to stick it all together! Dave R posted: 18 Apr 2018 14:02 from: Paul Boyd Rob Manchester wrote: Hi, Do people on here just use standard superglue to bond slide chairs to the stockrail? I notice a post advocating Loctite 435 adhesive for this but is this over the top? Hi Rob I've certainly advocated using Loctite 435, and ...