... . S1C, S1CR and S1CL). These are shown on the 2nd image in the original posting. It's almost impossible to photograph the transparent acrylic so I had to make up a short section of track and apply some paint. 100_211351_270000000.jpg The S1 chairs are C&L 3-bolt; the ballast is Slaters "Fine" (the bag is priced 84p so it may have been in my box for a while!); the ash is by C&L with a few bits of greenery by Woodland Scenics. 100_211351_510000000.jpg From left-to-right: CCR chair and 3 CC chairs. The CCL chair was out of focus so had to be cropped from this view. 100_211352_260000000.jpg From left-to-right: CC chair and CCL chair. You can just see some banding from the 3D-printing process in this enlarged image but the chairs are only approx 11 mm by 4 mm so this is not visible to the unaided eye. There are also some buffer stops which are suitable for all of the 7mm/ft gauges, ...