... chucked out recently! posted: 5 Dec 2010 14:10 from: JFS... couple more pics of the same job. 1129_050831_500000000.jpg By the way, this pic was taken BEFORE the crossing was positioned and fixed down- you will of course be more careful to get the base strips more acurately positioned!! Next time, I will leave the strips over length, blu-tac them to the template then cut then off flush to the railside after the job is finished. And the finished slip... 1129_050833_500000000.jpg This formation- in P4- is all at 1:6 and curved to produce a 36" minimum radius (with 0.2mm gauge widening and continuous check rails). If my 28xx and 9F will go through this, they will go anywhere... One other tip to help you get nicely flowing curves- I always "pre-curve" a longer length of rail to the radius of the completed formation, then cut pieces, file the angles then assemble the crossings with the rails still over-length. ...