... been previously assembled to its vee. You can also see that the other K crossing still requires two check rails adding. 1129_261114_570000001.jpg One aspect which has been mentioned previously in this forum is that the bends in the K stock/ wing rails and in the common crossing wing rails are NOT sharp- they are a fairly gentle radius (equal on the Real Thing to n feet where n is the crossing angle- a one in nine crossing being 9 feet radius- which even in 4mm is a pretty gentle 36mm radius curve! 1129_261114_570000003.jpg You can see from this image that I have made the switch blade and wing rail as a single piece. This I do by filing up the switch with the rail over length, then curving the whole rail until it sits perfectly on the Template, then accurately forming the knuckle and then flair. This takes a bit of practice- it is easy to get it near enough, but we are looking for spot on! Obviously, this will need splitting later for electrical purposes, but this is easily done with a ...