... riveting or punching tool, and I'll upload a photo when its finished best wishes Richard posted: 12 May 2013 11:18 from: Richard_Jones Hi, Here's the modified press with a Studiolith rivet tool in position- if I had been clever I could have cut the upper arm to the right length, but as I made the gap too large I drilled and taped a hole for a 6BA screw which gives some adjustment on the movement, and is probably a harder wearing material than press is cast in. best wishes Richard 1763_120614_070000000.jpg posted: 5 Apr 2020 14:53 from: Chris Noble Martin Wynne wrote: Templot can mark the rivet hole centres for you. See: http://www.templot.com/martweb/gs_printing.htm Scroll down to Handy Hints at the bottom. Hi Martin I can print the rivet point ok using rail and timber centres. Is there a way I can export this detail to a dxf so I can laser cut the rivet holes? Regards Chris Last edited on 5 Apr 2020 14:53 by Chris Noble posted: 5 ...