... this with a simple turnout, see images below. The actual drawing you posted is, unfortunately, not absolutely accurate, it does however say that on the drawing, as 'not to scale'. So its a little out, particularly at the crossing area. As you can see from the below images, the basic fit looks quite reasonable. This was achieved by simply using a 15ft straight heel switch, as shown in the data panel on the second image. Hope this helps. All the best, Brian. 1853_221104_100000000.png 1853_221103_290000000.png posted: 22 Aug 2014 19:27 from: Brian Nicholls Hi Luke, Just to be sure, I used the same basic turnout, using N (UK) gauge. Again, as you can see from the below images, the basic fit looks quite reasonable. As a check of almost symmetry, I have set the grid to 10mm squares so you can see this (or just about due to the dark background). If you look at the grid scale at 110 on the left and if you follow ...