... Store and background 22. Click the turnout again and Delete to the control 23. Click gauge- modify current settings- modify track gauge 24.Change the modified track gauge between rails to (in my example above) 28.35mm. Click Enter and OK You will notice that the turnout control template is offset as it is aligned on the main or turnout stock rail. 25. Click on the background template underneath, then click Main- Peg Align Tools- align the control template over and snake on to peg- facing to facing. 1876_280544_560000000.png The turnout is not aligned on the track centres and the crossing has disappeared off the end, the lead between switch and crossing has extended but this is not a problem as we are only interested in one or other (or usually both!) stock rails. Use F9, Ctrl+ F3 and (judiciously) F4 to adjust the template so that the track centres align with the background template. (Be careful about the use of F4 to lengthen the turnout rails. Use F9 and Ctl-F3 first of all ...