... -gauge/page-4 #entry2809317 and topic 1394- message 8685 Briefly: 1. Many/most builders of 0-MF pointwork use 32mm plain track flexi from C&L or Peco. It can be joined to 31.5mm gauge by warming the rails to soften the chairs, or by building a short length of gauge-transition track. The wider gauge is useful for gauge-widening on sharp curves. 2. Gauges for 0-MF are available from Debs of this parish, and from Roxey Mouldings: 2281_281441_470000000.jpg post-7091-0 -24142100-1503481704.jpg image linked from RMweb 3. It is difficult to find any dimensions on the C&L web site. Hopefully this will change with the new owner. So we don't know the flangeway gap width on their assembled crossings. They are assembled with high-temperature solder so not easy to modify. In any event attempting to change the flangeway gap on an assembled crossing is almost certainly doomed to failure, you would simply wreck it. 10 times easier to start again from ...