Templot logo

Templot Club Archive - Search Results

To search again, click the Back button in your browser.


Search results for: 25_120631_380000000.jpg

1 result found.

Did you mean: JPG or JPEG or 1.JPG?
... flush with the web face at the blade tip such that half of the web width remains to provide a stronger end to the blade. The next operation is to cut off the excess rail with my Xuron cutters then bend the rail at the start of the taper to get a straight inner face and also re-instate the inner radius of the rail head on the planing and finish off the tip of the blade with a fine file. I also did the same operation with Code 82 FB for my US S scale layout 25_120631_380000000.jpg Here the jig had an alloy base with a brass strip screwed to it to provide a face to hold the rail. The lower edge of the strip was relieved to allow for the flat bottom base. 25_120633_550000000.jpg Here the main planed face is being cut with the depth of cut at the end being to the rail centre line to leave half web thickness at the end. The rail head planing will be done on the other side. 25_120630_460000000.jpg And here are the resulting blades with their stock rails- the stock rails were ...
Terms matched: 1  -  Score: 16  -  126k  -  URL: https://85a.uk/templot/archive/topics/topic_1386.php


Search took 0.100 seconds


Back to Templot Club