... took his advice and have twisted each pair( positive and negative) to reduce the chances of radio interference. I've done the same with the Servo power bus as well to reduce the likelihood of unpleasant surprises! 2787_241604_240000000.jpg Next is a picture of the latest state of the control panel. As you can it's beginning to look a little crowded in there and with hindsight I should have made it much deeper. It'll do for the moment and I'll have to see if I ultimately feel I need to replace it with something better?2787_241623_150000000.jpg And lastly here is board number 6 in preparation to take with me on Sunday. The plan is stuck down after a few false starts and the black lines going across the board at various points are the channels I've cut for the metal tubing for point control. I'll also need to cut similar channels for the surface run wiring that I started to adopt when doing board 3. I still took the trouble to stick a mirror image of the plan to the underside of the board as I have the unhappy knack of completing ...