... to be recorded somewhere so that it can be re-usable. I will get all this fixed. It was all done in a bit of a rush to try to keep up with you at the time. In the meantime you MUST do this. Before quitting Templot, click this button: 2_131127_360000000.png WRITE DOWN the dimensions shown for X1,Y1, X2,Y2. They won't be saved anywhere at all once you quit Templot. If you used the mimic aid, also WRITE DOWN this Y-scaling figure: 2_141718_280000000.png Again, it is not saved anywhere. When you start the next program session, click the set... button again to create the previous boundary rectangle. Enter the X1 and X2 dimensions which you wrote down previously. For the Y1 and Y2 dimensions, if you used the mimic aid divide the Y dimensions which you wrote down by the Y-scaling percentage. i.e. in the above case divide them by 4.4308. So if you wrote down 560 mm, dividing by 4.4308 gives you 126.39mm. Enter that ...