... using superimposed partial templates, as an aid to subsequent timber shoving. (Equalized constant is also used for half-diamonds, of course.) I'm not aware that either of these styles would ever be correct for a single turnout- unless anyone knows otherwise? Martin. posted: 18 May 2014 13:42 from: Martin Wynne p.s. Michael, I have just had a look at your plan and noticed that you do not have a 6ft way minimum running clearance at this location (see the spacing ring): 2_180834_270000000.png By easing that turnout from 1:6 to say 1:7 you can probably cure this (and also ease the sharp radius in the turnout). Click the p-s pre-set button on the spacing-ring dialog to set the ring to 6ft way for your current scale and gauge. "6ft way" means the tracks are at 11ft-2in centres. The actual gap between the rails will be more than 6ft when using an under-scale track gauge such as 00, EM, 0 ...