... 2014 17:20 by Hayfield posted: 19 Feb 2014 13:06 from: Martin Wynne Hi John, I'm afraid you have made the classic mistake of not having the two switches far enough apart. This means that there is not enough room to open the second switch blade with its stretcher bar fixing behind the first switch rail, or to fit the slide chairs. As a rule of thumb you need about 3 rail-widths of gap between the rails at the tip. You have only about half of that: 2_190757_580000000.png Remember that the template shows the switches in the closed position, and doesn't show the inside rail foot at the blade tips. More about all this in my recent posts here: topic 2394- message 16119 regards, Martin. posted: 19 Feb 2014 15:17 from: Hayfield Martin Thank you very much, I must have misunderstood the part when placing each turnout on top of each other. Unlike the tutorial I am using an A5 and B6, as the B6 went on second I gave it a radius as ...