... match: 2_281244_340000000.png A few custom colours have been added on the top row by default. If you want to make space for a lot of new picked custom colours, simply change any unwanted ones to white. There is also a tools> get colour at mouse menu item on the trackpad for use when the sketchboard is not visible. But unfortunately there is no free keyboard shortcut available on the trackpad. The custom colours are now included in the program preferences between sessions. trackbed/cess edge now follows turnout TS: 2_250658_230000003.png 2_250658_220000002.png platform front edge now follows turnout TS: 2_250658_220000000.png 2_250658_220000001.png show switch info: the info panel can now show full-size dimensions in mm if preferred instead of inches: 2_270430_170000000.png storage box: box> box info menu item now includes smallest radius info and a link to the relevant template: 2_262302_240000000.png storage box: The box> print template info menu item now includes an option to create a PDF file containing all the template information. If you have a large track plan this makes it easier to print individual pages of template ...

... You asked too many questions to answer all in one go. Here's a bit more. For this you use the trackbed edges function. You can choose to have a solid cutting line, or 2 lines showing the ballast shoulder and cess: 2_221625_280000000.png printed template: 2_060536_020000000.png 2_071626_150000000.png On the prototype the underlying formation is prepared with a top slope of typically 1:20 for drainage into the cess, to typically 15ft trackbed width for a single track. The ballast is then spread on top of that. ballast edge+ cess: 2_250658_220000002.png The templates are intended as full-size cutting templates rather than a finished drawing. You are expected to scribble on them where necessary. You can also show the trackbed edges in diagram-mode output: 2_101848_130000000.png This option will apply in diagram mode for all outputs -- print, PDF, image file exports, sketchboard. But only of course for templates which have had their trackbed edges switched on at geometry> trackbed edges... menu item. This is the result on the sketchboard: 2_101848_140000002.png If you want ...