... as the Windows Locale. Templot is correctly showing and accepting a comma as the decimal separator. It must be getting on for 20 years since I last thought to check that. I remember that it caused some issues in the early days, and there was also a problem in generating DXF files. Martin. posted: 27 Feb 2019 20:29 from: Martin Wynne Hi Stefan, If you are concerned only with a drop-in replacement, you can get a very close match using a standard 9ft straight switch: 2_271516_390000000.png I flipped the turnout to left-hand for easier design. I negated the image and reduced it to low contrast for easier working over it. I scaled it to the specified length 455.39mm (specifying RTR to 1/100th of a mm takes a bit of believing). I set the 11.25 deg V-crossing angle (prefix with a letter k to enter angles in degrees, i.e. I entered k11.25). That is an angle of 1:5.03 RAM. I then set the lead length to match ...