... . With a bit of care you can do it all with just the one partial template. Use this menu item to set the curving in it: 2_290354_280000000.png Then using F9 and F10 alternately, adjust the angle and radius to match the other turnout. Keep the peg on CTRL-4 while doing it. The main work is adjusting all the check rail flares to clear the wheel backs and still maintain adequate checking of the crossings. It is usually necessary to adjust the flare length before you can adjust the rail length: 2_290357_260000000.png That still leaves the underlying turnout rails conflicting through the V-crossing, which can be dealt with by splitting them out on further partial templates in the usual way. cheers, Martin. posted: 29 May 2020 13:38 from: Martin Wynne p.s. Graham, The way to get the K-crossings is to temporarily peg a couple of lengths of plain track onto the CESP positions: 2_290821_410000000.png Then adjust the radius in them to fit the opposite CESP positions: 2_290822_510000000.png This will average out the difference in radius ...