... RH tandem turnout created using the "Make 3-way tandem turnout" tool which worked well except for a couple of issues regarding clearances. I am unsure how to best adjust the following in a prototypical manner. 1. How much adjustment can be made to the LH wing rail for the middle crossing to create a flangeway without affecting wheel movement through the crossing? 2. How much adjustment can be made to the associated middle crossing check rail on the RH turnout side, again without affecting wheel movement through the crossing? 3134_032304_090000000.png Additionally, I can identify the switch type for the LH turnout as B but do not know how to interpret the switch type for the RH turnout from the component data. I have attached the template Box file for reference. Any assistance would be appreciated. Regards Roger Attachment: attach_2828_3425_Shunting_Plank_10 4_Tandem.box 141 posted: 4 May 2019 06:20 from: Martin Wynne Hi Roger, Welcome to Templot Club. Thanks for providing the .box file. For the check rail, the essential requirement is that the wheels should be fully checked ...