... run the length of the unit. I have attached the chairs to the sleepers on all but the centre 5 sleepers. I build the crossings on C&L 0.5mm copperclad strip. You can see I have pealed back the paper on one side of the crossing and cut both pieces of strip flush with the rails. I then superglue these two copperclad strips to their sleeper 982_260230_130000000.jpg I then do exactly the same to the other side, but leave the centre full length piece of copperclad intact whilst the superglue and chairs set fully 982_260235_590000000.jpg The half chairs that are fitted are super glued to the rails for added strength and glued using solvent to the sleepers, as I said I now let everything set thoroughly before repeating the process on the final copperclad strip I use the C&L 0.5mm strip out of convenience, any piece of strip metal 0.5mm thick or less would do. You could also use the strip between the sleepers so all chair parts are used, I feel this would look more visible than the method I have used Attachment: attach_1998_2577_points_107.jpeg 522 posted ...