... chairs set fully 982_260235_590000000.jpg The half chairs that are fitted are super glued to the rails for added strength and glued using solvent to the sleepers, as I said I now let everything set thoroughly before repeating the process on the final copperclad strip I use the C&L 0.5mm strip out of convenience, any piece of strip metal 0.5mm thick or less would do. You could also use the strip between the sleepers so all chair parts are used, I feel this would look more visible than the method I have used Attachment: attach_1998_2577_points_107.jpeg 522 posted: 26 Nov 2014 21:25 from: Trevor Walling HelloJohn, That is quite a neat idea. I am assuming the copperclad is soldered to the rails to create electrical continuity after you cut the insulating gaps?I am also assuming the copperclad gaps the rail from the sleeper about the same as a chair would? Regards Trevor. posted: 26 Nov 2014 22:01 from: Hayfield Trevor Hi You don't have to use copperclad strip, as any metal shim will work. Neither will there be any ...