... Martyns suggestion tried something a little shorter. So this attempt is a 12ft switch and a 1:6 crossing. Looking reasonable I'd be happy to using at this standard but it's not quite right on the match. The curve on the rails on the turnout sides doesn't quite match between the switch and the crossing. Using a slightly shallower crossing might help but increases the overall length. I'll still perservere because it's been quite instructive in the geometry of the turnouts and the interaction between the switch settings and crossing. Adrian Attachment: attach_212_314_3way_m3.jpg 308 posted: 17 Jan 2008 04:49 from: Adrian Hopefully some one will correct me if I'm getting this wrong. I wasn't happy with the previous attempt as the centre crossing just didn't align correctly. looking at the photo it seemd to me that for the left hand turnout in particular the section between the left-hand crossing and the centre crossing was virtually straight. I had visions of mixing and matching all sorts of part templates to get the geometry but then I found the option "length of entry straight ...