... : http://www.templot.com/martweb/info_files/gimp_track.htm regards, Martin. posted: 11 Jan 2008 04:18 from: Martin Wynne Martin Wynne wrote: My guess is a B7 or B7.5 Rewind on that -- I'm now going for B6.5 First off is to count the chairs -- this is easiest for the curved stock rail, and I make it 24 between the switch front rail joint (marked red) and the near end of the check rail. I've lightened the image to make counting easier: harrogatehaworth_light.jpg© Roderic Cameron I've gimped the image and re-sized it based on the length of the check rails and the most likely length of the top of the FPL plate (which I've assumed to be in the same plane as the rail top). It turns out that a B6.5 CLM (6.46 RAM) with generic crossing fits quite well, and that just happens to have 24 timbers between the rail joint and the check rail (timbers J2- T11): harrogatehaworth_b65.png harrogatehaworth_b65_1.png I will post a few more notes about ...