... mrn_scan.jpg It's designed for 0 gauge, and like many published plans when you start to design it properly you find that lots of things don't fit very well. On this one there are no real transition curves between the sharp curves and the straight section with the pointwork in the station throat. It's all a bit too abrupt to look right. So I rotated it round to the more usual arrangement, pulled it apart by a few inches, and shifted the pointwork area sideways by about an inch to allow for better transitions: mrn_plan.jpg I then tried it in EM, with this result: mrn_overlay.png mrn_overlay1.png It would be much better to replace the straight section with a gentle curve. That would have the effect of pushing the transition zones further out, and avoid having the pointwork on the transition zones. It would be even better to make the layout even longer and gain a bit more space for this station throat. But of course, once you start making changes, where do you stop? It's currently 4000mm long for the area shown (13ft x ...