... 14 from: Martin Wynne Peter Salathiel wrote: Any chance you could include a short and long crossing in the collection. Would two tracks, crossing length, overlapping at 12 degrees, suffice? Hi Peter, Make a Barry slip! For the Peco long diamond-crossing (or slip), start with the short Peco turnout as the current/control template. Put the peg at DP (CTRL+ 3). Then: store& background geometry> shift/rotate> rotate 180 degrees store& background See: peco_long_crossing.png That makes a long crossing footprint for planning purposes. Ignore the internal rails and timbering. You might prefer to turn the timbering off. For the short crossing you first need to change the short turnout to 24 degrees: template> V-crossing options... other angle, OK Set the crossing angle to k24 (the k prefix letter enters degrees instead of unit angles) Then repeat the conversion to a Barry slip as above. If you have Peco crossings you can physically measure, check that the actual lengths ...