|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 26 Sep 2012 21:03 from: kimstation
click the date to link to this post click member name to view archived images |
Hello, I am building SM32 points. Is it possible to specify different radii for each leg of an asymmetrical Y point? I would like to place a Y point in a 54 inch radius curve, where the right hand leg would be the running line with has a 54 inch radius and then the left leg would branch off, with a 60 inch radius. Pleased can anyone help? Many thanks in anticipation. Kim |
||
posted: 26 Sep 2012 21:35 from: Martin Wynne
click the date to link to this post click member name to view archived images |
kimstation wrote: I am building SM32 points.Hi Kim, Is this quick dabble something like what you are looking for? 2_261627_450000000.png What you do is set the 54" main road curving (negative for a Y-effect -- contraflexure), and set a curviform type of V-crossing. Then adjust the V-crossing angle (F9 mouse action) until you hit the desired resultant turnout radius (60" is 1524mm as shown). This is using a 1:24 switch and ideally you need a custom switch here a bit shorter, say 1:18 or 1:20. Probably you also want equalized timbering. regards, Martin. |
||
posted: 26 Sep 2012 22:39 from: kimstation
click the date to link to this post click member name to view archived images |
Hi Martin, This looks just what I was looking for. Thank you. Kim |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |