|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 6 Oct 2017 23:28 from: madscientist click the date to link to this post click member name to view archived images |
Hi My actual requirement is to build 00-SF points that will flare out to match PECO bullhead, was wondering if there is anything that matches the timbers of the PECO plain track in Templot I dont need to match it up to the new PECO bullhead point work so what I need is 00-SF with PECO bullhead sleepering thanks Dave (PS I dont have any PECO bullhead yet , so thats part of the issue , its on its way though ) |
||
posted: 6 Oct 2017 23:50 from: Martin Wynne
click the date to link to this post click member name to view archived images |
madscientist wrote: Hi My actual requirement is to build 00-SF points that will flare out to match PECO bullhead, was wondering if there is anything that matches the timbers of the PECO plain track in TemplotHi Dave, I suggest you flare the Peco bullhead to match your 4-SF pointwork, not the other way round. Attach it with rail joiners, hold it down flat, warm the end couple of inches of the rails with a soldering iron to soften the chairs. To set the plain track templates, first set 4-SF gauge, then real > plain track options > rail lengths and sleeper spacings... menu item: 2_061840_350000000.png Select the 60ft/26 sleepers option. That of course will be for jointed bullhead. Long-welded bullhead is extremely rare, even though that is what a yard length of Peco track is in effect. Over to you on whether you want to re-space the sleepers to match the rail joints on the templates. If not, for unjointed bullhead, select a custom slot, click the custom settings... button above. Set a dummy "rail length" which is equal to the sleeper spacing of 28", and have a single sleeper spaced at half that distance 14" from the dummy "joint". Then click the real > plain track options > rail-joint marks > none menu option. If that doesn't quite match the flexi-track, adjust the 28" accordingly. regards, Martin. |
||
posted: 7 Oct 2017 23:23 from: madscientist click the date to link to this post click member name to view archived images |
thanks, generally I find it quite easy to flare the ends of my 00-SF points as i just lay the last few chairs using a standard 00 gauge . for collections of points I retain the 16.2 throughout and only flare back at a plain track end thanks for the tips |
||
posted: 7 Oct 2017 23:35 from: Martin Wynne
click the date to link to this post click member name to view archived images |
madscientist wrote: thanks, generally I find it quite easy to flare the ends of my 00-SF points as i just lay the last few chairs using a standard 00 gauge . for collections of points I retain the 16.2 throughout and only flare back at a plain track endHi Dave, One fine day you may want to re-use that pointwork in a different location or layout, possibly linked to other 4-SF pointwork. You will then find that removing the flared-out sections will be tricky. My feeling is that if you are building a layout to the 4-SF standard (or any other), you should build as much as possible to that standard, and only deviate from it where unavoidable, for example when using commercial flexi-track. Similar considerations apply to the 0-MF standard. And you might also want to build jointed 4-SF plain track in the most prominent or visible parts of the layout. Perhaps at a later date. regards, Martin. |
||
posted: 8 Oct 2017 11:51 from: madscientist click the date to link to this post click member name to view archived images |
Thanks, your advice is always appreciated.I've never yet recovered a home built glued down point this didn't get damaged in the process | ||
Last edited on 8 Oct 2017 11:52 by madscientist |
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |