|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 6 Jan 2018 18:38 from: chrisveitch
click the date to link to this post click member name to view archived images |
Apologies for this very simple request from an outright beginner, but I've been unable find anything to guide me on this one - I probably just haven't watched the right tutorial yet. In the screen shot below I want PR026 to curve from turnout TL025 and run parallel (at the standard double track spacing) to the straight containing TL037. As you can see I've been able to create the branch track but have no idea how to get it run parallel to the existing straight, although I'm sure this is very straightforward. Regards, Chris Veitch 2676_061333_250000000.png |
||
posted: 6 Jan 2018 19:03 from: chrisveitch
click the date to link to this post click member name to view archived images |
To save anyone the bother I've now found this: tools->make return curve |
||
posted: 6 Jan 2018 19:52 from: Martin Wynne
click the date to link to this post click member name to view archived images |
chrisveitch wrote: To save anyone the bother I've now found this:Hi Chris, Yes. But it is not always the best result. Depending on the position of the boundary between the two turnout templates, the return curve may be too short (needing an extra short bit of curved double track to reach the straight section), or too long, in which case it won't fit. Another option would be to change to a parallel type V-crossing on the lower turnout, but with the same problem if the return is too long to fit. Difficult to say from your screenshot. A better solution is probably to use the make transition function: 1. make MS double track from the upper turnout template. Extend its length. 2. make branch track on the lower turnout template: 2_061431_460000000.png 3. Using F6, curve it round so that the two centre-lines don't quite cross: 2_061433_570000000.png 4. click on the background template (the straight track) and then peg/align tools > make transition curve from control template. This will be the result: 2_061437_050000000.png 5. now delete the two underlying templates. Then click on the lower turnout and: 2_061439_410000000.png with the result: 2_061439_410000001.png You can now use F4 to extend the length of it as required. More about this method here: http://templot.com/companion/link_existing.php regards, Martin. |
||
posted: 7 Jan 2018 08:55 from: chrisveitch
click the date to link to this post click member name to view archived images |
Thanks for the comprehensive reply, Martin - I'll give it try today. Regards, Chris |
||
posted: 8 Jan 2018 20:12 from: chrisveitch
click the date to link to this post click member name to view archived images |
Thank Martin - that works fine for straight track. How would I create this double track along two different curves, i.e. if I already had single track which consisted of a left hand, then straight then right hand? I had a feeling that this might be covered by "Joining Groups" in Gentle Geometry ( http://templot.com/martweb/gs_geometry.htm) but having read through it I now think that's not the case. |
||
posted: 8 Jan 2018 21:04 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Hi Chris, Can you attach a box file or screenshot or sketch showing what you mean? Generally if you have a string of templates forming a running line, you would use the tools > make double-track function on each one to create a string of templates running alongside. To link between them, you can use make crossover, make ladder, make return curve, or whatever is needed for a specific site. Or at the start of a loop from a single line, you could set a parallel type of V-crossing on the turnout. I suspect that may have worked well on your first example, but would probably have needed the turnout to be roamed back a bit to make room. It is always difficult to make suggestions without the box file. Some things fit the available space better than others. I suggested using make transition because it will work in almost all situations, whereas the other solutions may not fit. regards, Martin. |
||
posted: 9 Jan 2018 16:50 from: chrisveitch
click the date to link to this post click member name to view archived images |
Hi Martin, Thanks for that. I've attached a simple BOX file showing an example - there are two curves linked by a straight. Apologies for stringing this one out... From what you've said, to make this into double track I'd need to select each in turn and use Make Double Track on each of the three segments. I'd assumed that there was some way to group the three into one object and do this in a single action, but it seems that there's not - is that correct? Regards, Chris |
||
Attachment: attach_2615_3176_curve_example_1.box 238 | |||
posted: 9 Jan 2018 18:03 from: Martin Wynne
click the date to link to this post click member name to view archived images |
chrisveitch wrote: From what you've said, to make this into double track I'd need to select each in turn and use Make Double Track on each of the three segments. I'd assumed that there was some way to group the three into one object and do this in a single action, but it seems that there's not - is that correct?Hi Chris, That's correct. Double-track must be made separately for each template. That's because you may need to change the track spacings. On sharp curves more clearance is needed to allow for vehicle overhangs. However, a string of templates forming a reverse curve such as your example would often be replaced with a single template as an S-curve transition, like this: 2_091300_240000000.png Then it would be only one click to create the double track. Or 2 templates forming an easement transition at each end of the straight. Then it is only 2 clicks to create the double track, like this: 2_091248_380000000.png Generally it's not good practice to have a sharp curve connecting directly to a straight track. regards, Martin. |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |