|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 15 Mar 2008 04:04 from: BeamEnds click the date to link to this post click member name to view archived images |
Hi All, Soddingham-under-Piddle now has baseboards! Horrah! The only snag is Martin did tell me how to swap the plan from GOG-Fine to 0-FS, but I can't for the life of me remember where and my DIY attempts haven't gone too well.... Any chance of a nudge to the little grey cells Martin? Cheers Richard |
||
posted: 15 Mar 2008 04:29 from: Martin Wynne
click the date to link to this post click member name to view archived images |
BeamEnds wrote: Soddingham-under-Piddle now has baseboards! Horrah! The only snag is Martin did tell me how to swap the plan from GOG-Fine to 0-FS, but I can't for the life of me remember where and my DIY attempts haven't gone too well.... Hi Richard, See: http://www.rmweb.co.uk/forum/viewtopic.php?p=281364#p281364 First select all the templates as a group (CTRL+A). Then go to the full gauges list (other gauges... menu item). Then select the new gauge/scale standard you want on the list. Then click the convert group button at the top of the dialog. However, there's a bit of a snag. Because you are changing the gauge:scale ratio slightly, the lead lengths of the turnouts and diamonds will change slightly. You may find some slight gaps or overlaps between the templates which will need tidying up after doing the conversion. Mostly it should be ok. regards, Martin. |
||
posted: 15 Mar 2008 06:24 from: BeamEnds click the date to link to this post click member name to view archived images |
Hi Martin, thanks! Ok, here we go.................. very pretty effects! ........... done. No problems! A few gaps but nothing to worry about. Another excellent feature. Cheers Martin! Richard |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |