Something I found on eBay from this Canadian Company
A filing jig which aids filing the vee and switch rails. from code 75 to 100 and flatbottom as well as bullhead
Its double sided as well as ended, the longer grove is for the switch blade the shorted for the vee. The other side is exactly the same
slide the rail in from one end, in this case the right for the switch and file
It only does 1 side, but the head of the other is quite easy to form
Slide in from the other side and its the vee rail
Nicely formed, but unlike the EMGS of P4 Soc jigs, this only does one angle (1-6 in this case), however it does both Vee and switch rails, and more importantly flatbottom as well as bullhead
They are a bit dear $50 USD plus postage, however is building a few at the same angle will soon pay for itself against the cost of commercially made items
Link
https://www.handlaidtrack.com/filing-jigs-pointform
They are a bit dear $50 USD plus postage, however is building a few at the same angle will soon pay for itself against the cost of commercially made items
Link
https://www.handlaidtrack.com/filing-jigs-pointform
message ref: 1916