John40131
Member
- Location
- Edgworth, Bolton
Thanks for the join, I found your web site from watching Bexhill West, and thought it may help me with a 4 way diamond crossing I made about 2 years ago, and I am getting close to running trains but not sure if the crossing will work so I would be interested to know how I could create this type of crossing with Templot ...
Basics of crossing starts with 5 "Y" points and 4 track to left cross 4 tracks to right there are a couple of other tracks either side but they are not using crossings, I also 3D printed middel sections to try and keep wheels in position ... all thr frogs I have wired but the tracks I have yet to isolate, polarity change is done via an Arduino Mega Sketch and minature relays to switch polarity depending which route is selected ...
I have yet to get to know the program but will most definitely use ...
Most grateful for any help...
Regards John
Basics of crossing starts with 5 "Y" points and 4 track to left cross 4 tracks to right there are a couple of other tracks either side but they are not using crossings, I also 3D printed middel sections to try and keep wheels in position ... all thr frogs I have wired but the tracks I have yet to isolate, polarity change is done via an Arduino Mega Sketch and minature relays to switch polarity depending which route is selected ...
I have yet to get to know the program but will most definitely use ...
Most grateful for any help...
Regards John
message ref: 2465