Franco
Member
- Location
- Bosconero-Turin-Italy
Thanks both for your answers but, at this point, I'd better tell you the whole story.
It all began some years ago when I decided to build a micro (or so to say) layout industry themed in 0e (or 0/16,5 if you prefer) on a 120 x 55 cm baseboard from a scrapped table; the trackplan is a sort of bean shaped oval with some branches here and there.
As there's no manufacturer having such narrow curves in their range i was forced to handbuild track but all points were from Hornby's range. This project was abandoned for various reasons but now I would like to refresh it switching to a meter gauge suburban tramway (maybe electrified by overhead wire) in S scale.
I'll try to put down a sketch to illustrate what I have in mind ... stay tuned
It all began some years ago when I decided to build a micro (or so to say) layout industry themed in 0e (or 0/16,5 if you prefer) on a 120 x 55 cm baseboard from a scrapped table; the trackplan is a sort of bean shaped oval with some branches here and there.
As there's no manufacturer having such narrow curves in their range i was forced to handbuild track but all points were from Hornby's range. This project was abandoned for various reasons but now I would like to refresh it switching to a meter gauge suburban tramway (maybe electrified by overhead wire) in S scale.
I'll try to put down a sketch to illustrate what I have in mind ... stay tuned
message ref: 1779