|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 11 Apr 2010 16:15 from: Hayfield
click the date to link to this post click member name to view archived images |
Sorry for being so thick but could someone please explain the difference between the geometrical radius, the switch radius and the turnout radius (which happens to be the minimum radius?), I thought the geometrical radius was the raduis the turnout would fit into, am i right, thanks in advance | ||
posted: 11 Apr 2010 16:49 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Hayfield wrote: could someone please explain the difference between the geometrical radius, the switch radius and the turnout radius (which happens to be the minimum radius?), I thought the geometrical radius was the radius the turnout would fit into, am I right, thanks in advanceHi John, The switch radius (yellow) and the turnout radius (green) are the actual radius in different parts of the rails: semcu_sw.gif You are right, the external geometrical radius is also known as the substitution radius, and is the radius of a continuous curve the entire turnout road could be fitted into. It's the radius normally quoted by manufacturers of commercial turnouts. The rails don't actually follow this curve exactly because of the effect of the switch deflection angle, and the different types of V-crossing. There is a video explaining substitution radius at: http://www.templot.com/martweb/videos/subs_rad.exe The internal geometrical radius is also quoted for complete information. It represents the "average" radius up to the nose of the vee only. It is useful when matching a custom turnout design to some older types of pre-grouping, industrial and narrow-gauge turnouts. regards, Martin. |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |