Templot Club Archive 2007-2020                             

topic: 1260Dock Road
author remove search highlighting
 
posted: 2 Oct 2010 18:05

from:

phileakins
 
Swanage - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
A while ago I introduced a design for Blue Town, base on Sheerness Dockyard post - 1883 track plan.

Having thought long and hard I have decided to go back a few years to a simpler layout (no tandem points!) which is attached for your comments please.

The main line is laid to the LCDR standard track for the period to 1882 with 21 foot rails with 8 sleepers per length.  However, the branch opened in 1860 using 21 foot rails but only 6 sleepers per length and I have retained this track in the sidings.  I have rather guessed how the points might have appeared but have retained longer sleepers under the crossing for ease of building. Further information much appreciated though.

The main line will be covered with 'top ballast' as was normal at the time so the point sleepering (I've used 10in wide sleepers rather than 12in timbers) will not be seen.

Until the sketchboard appears .... the loco shed is on the line below the turntable and to the right of it.  The goods shed is on the top siding just to the left of the point from the diamond crossing, meaning that loco's to the turntable entered the GS to reverse!  Bound to create some comment if the layout is ever exhibited.  The Signal Box is on a gantry over the main line below the loco shed forming a scenic break to the cassette yard.

Because of restrictions in length I've condensed the track plan quite a lot but tried to retain the main features, so some curves are a bit sharp in the sidings, but then they were of course.  The loco's of the period were of short wheelbase so going to and from the shed (the track plan needs a shed pilot) shouldn't be a problem.

Anyway, there it is.  All comments/suggestions welcome.

Phil
Attachment: attach_894_1260_dock_road_1860_origi_10_10_01_1344_13.box 324

posted: 3 Oct 2010 18:16

from:

phileakins
 
Swanage - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Thanks for looking - I'm attaching a screenshot of the track plan to make things a little clearer.

Phil
Attachment: attach_903_1260_Dock_Road_03-10-2010_18-08-40.png 581

posted: 7 Oct 2010 12:08

from:

phileakins
 
Swanage - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
I wonder what it is - I can't seem to stop tinkering with a perfectly workable design. :roll: Thank goodness I keep saving it as I can then back-track!

However, I have found that If I replace the regular V crossing with a generic one of the same value in the two yard turnouts I can gain several valuable extra inches in the turnout's nominal radius without changing anything else. I've no idea whether it's prototypical - but it is pragmatic in view of the cramped design.

Phil

posted: 6 Dec 2010 20:52

from:

phileakins
 
Swanage - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
If anyone is interested, I'm building the pointwork for Dock Road here.

Phil

posted: 7 Dec 2010 11:16

from:

JFS
 
United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Excellent stuff Phil - thanks for the link.  The S7 looks excellent.

A couple of us have been having a discussion about PCB vs brass strip for supporting rails at crossings.

topic 1300

What has been your experience of PCB so far?

Howard.

 


posted: 7 Dec 2010 17:47

from:

phileakins
 
Swanage - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Thanks Howard.

I use (as you've seen) Exactoscale/C&L chairs on ply sleepers. V and obtuse crossings are reinforced by 'copperclad fibreglass strips 1mm thick' C&L code 7ZC101A @ £3.24 a pack of (I think) 10 strips. A strip is not long enough to make a sleeper, but my first pack has gone a long way.:) I've just now ordered another couple of packs although I have a enough left to finish the crossover on hand.

My experience of the strip is that it does the job just fine (after all it is made for it!)solders easily and is very economical for the amounts I use per point. To be honest, unless you are soldering a brass strip across the rails between the sleepers, in which case almost anything will do, I'd spend a few pennies and stop searching.

(Thanks Brian - I'll have the commission in used fivers. :D)

Phil

PS No connection, just a pleased user.
Last edited on 7 Dec 2010 17:47 by phileakins


about Templot Club

Templot Companion - User Guide - A-Z Index Templot Explained for beginners Please click: important information for new members and first-time visitors.
indexing link for search engines

back to top of page


Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so.
The small print: All material submitted to this web site is the responsibility of the respective contributor. By submitting material to this web site you acknowledge that you accept full responsibility for the material submitted. The owner of this web site is not responsible for any content displayed here other than his own contributions. The owner of this web site may edit, modify or remove any content at any time without giving notice or reason. Problems with this web site? Contact webmaster@templot.com.   This web site uses cookies: click for information.  
© 2020  

Powered by UltraBB - © 2009 Data 1 Systems