|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 12 Feb 2012 20:28 from: sm
click the date to link to this post click member name to view archived images |
Is there a way of creating a diamond crossover out of two lengths of straight track, for instance if I decided to cross two straight lengths of track at 45degrees to each other or even 90degrees is there a way to make the intersection a crossing Rgds, Stuart |
||
posted: 12 Feb 2012 20:51 from: Martin Wynne
click the date to link to this post click member name to view archived images |
sm wrote: Is there a way of creating a diamond-crossing out of two lengths of straight track, for instance if I decided to cross two straight lengths of track at 45degrees to each other or even 90degrees is there a way to make the intersection a crossing.Hi Stuart, Not 45 degrees or 90 degrees. Templot can't produce crossings shorter than 1: 1.5 RAM ( i.e. not more than 33.7 degrees). Using Templot Development Version (TDV) only: 1. Start with two lengths of plain track crossing over each other. They can be both straight, or both curved, or one curved and one straight length. One should be a background template and the other should be the control template. 2. Click on the background template. 3. On its menu, click peg/align tools > make diamond-crossing at intersection menu item. 4. Follow the instructions and wait a moment while Templot does the calculations. 5. You will then need to split the underlying original background template and shorten each half back to clear the new diamond-crossing. The method won't work for transition curves, it is for straights and fixed-radius curves only. Also it is very easy when testing to have the tracks crossing at too short an angle. Templot can't produce crossings shorter than 1: 1.5 RAM ( i.e. not more than 33.7 degrees). If both templates are straight, or both curved in the same direction at the same radius, the result is a regular diamond-crossing. In all other cases the result is an irregular diamond-crossing. Note that the DP peg position (CTRL-3) for an irregular half-diamond is not coincident with central CTRL-0 position and serves little practical purpose. Or at least, I haven't found a use for it yet. 6. For all short-angle diamonds you will probably want to do some timber shoving to tidy them up. The TDV program needs some further work in this area. More about irregular diamond-crossings in TDV here: topic 1486 regards, Martin. |
||
posted: 12 Feb 2012 21:23 from: sm
click the date to link to this post click member name to view archived images |
Thanks Martin Rgds, Stuart |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |