|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 24 Mar 2012 18:34 from: julia click the date to link to this post click member name to view archived images |
What glue do people recommend for gluing rail to sleepers? Julia |
||
posted: 24 Mar 2012 19:12 from: Ian Allen
click the date to link to this post click member name to view archived images |
I personally wouldn't recommend gluing rail directly to sleepers. Glue chairs to sleepers or solder rail to copper clad paxolin sleepers. Ian |
||
posted: 24 Mar 2012 19:18 from: Paul Boyd
click the date to link to this post click member name to view archived images |
I would go along with Ian. Having said that though, I have heard of people gluing flat-bottom rail directly to sleepers to represent light railway practise, and I think Thixofix was suggested. Personally, if I was doing that I would use Loctite 435 plus the appropriate activator (no possibility of adjustment though!). I would also use Proto:87 spikes, and a bottle of whisky to take away the tedium |
||
posted: 24 Mar 2012 19:50 from: wcampbell23
click the date to link to this post click member name to view archived images |
Hi Julia You will get more useful advice if you could let us know what you are trying to achieve - scale, gauge, narrow gauge, type of rail and material used for timbers for example. Another approach would be - "How did your prototype secure the rails to timbers?" - and then go about it in the same way. Regards. Bill. |
||
Last edited on 24 Mar 2012 19:52 by wcampbell23 |
|||
posted: 24 Mar 2012 21:16 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Paul Boyd wrote: I think Thixofix was suggested. Personally, if I was doing that I would use Loctite 435 plus the appropriate activator (no possibility of adjustment though!).Hi Paul, Julia, Try a hot-melt glue gun. 1. cut a long groove in a stick of wood. 2. FB rail upside down in groove. 3. Advance slowly along it with a dry soldering iron in one hand and a hot-melt glue gun in the other following immediately behind. Heating the rail first makes it possible to apply a thin even film of hot-melt adhesive. 4. Wait for it to cool until the adhesive is no longer tacky. 5. Position the rail over the timbers with gauge tools in the usual way. 6. Work along it with a dry soldering iron, heating each joint in turn and firming the rail down with a suitable tool. 7. If you need to make adjustments, re-heat and adjust in the same way as for soldered construction. 8. Wait until the adhesive is stone cold, i.e. overnight or in the fridge. Any surplus adhesive can then be easily cut away with a craft knife. regards, Martin. |
||
posted: 24 Mar 2012 21:38 from: Nigel Brown click the date to link to this post click member name to view archived images |
Hi Julia My first ever attempt at making track was gluing FB rail onto balsa sleepers stuck on a balsa sub-base. It worked OK. I did get into trouble from my parents as the rail was extracted from some Hornby Dublo 3-rail track; in my defence, it was a somewhat battered bit of track which we'd somehow acquired second-hand. I used Durofix (remember that?). I'd suggest picking any likely candidate and just trying it, to see how it works. You'll soon see if it's strong enough. I'd don't see why it shouldn't be at least as good as soldered construction on copper-clad sleepers. As Bill said above, it would help if we had more detail as to what you've got in mind. Cheers Nigel |
||
Last edited on 24 Mar 2012 21:38 by Nigel Brown |
|||
posted: 5 Apr 2012 02:17 from: julia click the date to link to this post click member name to view archived images |
wcampbell23 wrote:Hi Julia In this case it is for my H0e (9mm gauge, 3.5mm scale) narrow gauge layout. At Alli Pally I had a nice chat with the guy from the EMGS stall who showed me a really neat jig that he uses for making curved/straight track. I would like to try and replicate this. What I have been doing for my normal track so far has been to use 1 PCB sleeper for every 4 wood sleepers (bass wood from Eileen's Emporium). This gives a nice balance between the strength of the soldered PCB sleepers, with the cost and appearance of the wooden sleepers. I am using code 55 flat bottom rail. My layout is freelance and not based on any particular prototype, but there is a loose resemblance to Baden Würtemberg in Germany. Hence asking for suggestions for an adhesive for sticking metal rail to wooden sleepers. Superglue doesn't do the trick. It is worth noting that after fixing the rail in place I have been making a 0.6mm hole in each sleeper next to the rail and inserting a pin, which gives the appearance of a small chair, this is a photo of a test to see how well this method worked: TrackSpike-01_sm.jpg This is purely cosmetic and isn't intended to provide any mechanical strength. J |
||
posted: 5 Apr 2012 08:44 from: Jim Guthrie
click the date to link to this post click member name to view archived images |
julia wrote: Julia, Do you need to glue your rail to the wooden sleepers. I used the same method of track construction on an N scale layout many years ago - using a PCB sleeper every four or five wooden sleepers, and the PCB sleepers were more than adequate to hold the rail in place. I've also, more recently, built track with the 2mm Association Code 40 wire rail. This track is to represent street trackage with the sleepers hidden under cobbles, so I have used PCB sleepers at roughly one inch spacing and the track is firm and won't need any further support between the PCB sleepers. Jim. |
||
posted: 5 Apr 2012 09:19 from: wcampbell23
click the date to link to this post click member name to view archived images |
Hi Julia Another possibility - from the dim memories of the past. I remember a magazine article describing the use of staples as baseplates to which the rail is soldered. The article was for 4mm scale standard gauge with code 100 flat bottom track. If you want all timber sleepering, lay the timbers (i.e. glue to your Templot plan), fashion a "staple" (this sort of shape |_| ) from wire to suit your rail, embed "staple" in timber (you may need to drill pilot holes) and then solder rail to "staple". This should give you a neater fixing than soldering to copperclad and replicate rail fixings better in your scale than the pin you have used. The main snag with this method is that it is rather labour intensive but should look good. Regards. Bill. |
||
posted: 5 Apr 2012 12:14 from: Nigel Brown click the date to link to this post click member name to view archived images |
Bill This was a fairly common method a while ago. Can't remember the fine detail, but I think it used small commercial staples. I think the idea was that you fitted the staples to the sleepers before using them. I.e. drill a couple of small holes of the right distance apart lengthwise on the sleepers, on either side of where the rail should go (doesn't have to be too accurate), repeat for other rail. Insert staple and fold underneath to grip the sleeper (you might be able to use the stapler itself to achieve this). Personally I think if I was going to use some copper-clad sleepers on track, I'd be inclined to use all copper-clad. Makes life whole lot simpler. Nigel |
||
posted: 5 Apr 2012 13:12 from: Jim Guthrie
click the date to link to this post click member name to view archived images |
Nigel Brown wrote: This was a fairly common method a while ago. Can't remember the fine detail, but I think it used small commercial staples. I think the idea was that you fitted the staples to the sleepers before using them. I.e. drill a couple of small holes of the right distance apart lengthwise on the sleepers, on either side of where the rail should go (doesn't have to be too accurate), repeat for other rail. Insert staple and fold underneath to grip the sleeper (you might be able to use the stapler itself to achieve this).Nigel, If I remember correctly it was called the "Little Western" track system designed by (I think) Jack Russell to use on his Little Western layout. I believe you could purchase sleeper bases with the holes for the staples already punched, and the staples were a proprietary brand of the time (1960s). Also, IIRC, the staples became difficult to source and the only other small staples available were a bit too large. Jim. |
||
posted: 5 Apr 2012 13:24 from: Nigel Brown click the date to link to this post click member name to view archived images |
I knew Jim Russell had a lot to do with it. I think the track bases were fibre. Cheers Nigel |
||
posted: 18 Apr 2012 14:17 from: Andy Vines
click the date to link to this post click member name to view archived images |
Just one thing that you may already be aware of. If you are putting your small pins through double sided copper clad remember to gap both sided to prevent a short. Like I say you are probably already aware of this, but its a stupid mistake I made recently when using a single copper clad sleeper at a baseboard joint... Doh! |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |