|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 21 Jan 2011 21:24 from: Steve Evans click the date to link to this post click member name to view archived images |
I have scanned a prototype track plan into templot and have added the track templates. Doing a print preview the layout would be over 14 feet in length in OO. The space that I have available is 9 feet on its longest length. I do not want to compromise on length because I want to run prototypically length trains so the easiest way to achieve this would be to "curve" the plan so that I can make it fit in a space 9 feet x 6 feet. Is this possible? I assume that I would just load the template plan without the background shape and then bend it somehow. Grateful for any advice. Regards, Steve |
||
posted: 21 Jan 2011 21:47 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Steve Evans wrote:I assume that I would just load the template plan without the background shape and then bend it somehow. Grateful for any advice.Hi Steve, Sorry to disappoint you, but this isn't possible. The trackwork on the inside of the bend would get crunched up to fit, and would no longer be prototypical and possibly not even buildable. Likewise on the outside of the bend the trackwork would all get stretched out, with similar results. Templot would need to be massively more complex and intelligent to sort it all out by itself. More about this subject in this topic: topic 348 Unless this is a very complex track plan, it shouldn't take you too long to re-align everything onto new curved centre-lines. There is a video showing how to do that in this topic: topic 349 regards, Martin. |
||
posted: 22 Jan 2011 10:10 from: Steve Evans click the date to link to this post click member name to view archived images |
Martin, Thank you for your reply - I will have a look at the video. Steve |
||
posted: 18 Jul 2011 13:38 from: Richard_Jones
click the date to link to this post click member name to view archived images |
Hi Steve, I know exactly where you are coming from - if you look at my proposals for Singleton I need something like 21' if I didn't curve it around..... My solution was to draw a curve (represent a 15' radius in my case) and do a literal "cut and paste" of a print of the scanned prototype plan so that the 1' (linear) on the drawn curve = (25.4 x 12)/4 ' on the scanned plan. I then rescanned the "curved" version to use as the background shape. A bit tedious, but it worked. If its any help, to make sure the whole thing flowed in TEMPLOT the first template I put down was a 15' radius curve through the station, and then worked everything from that - ie inserting turnouts, parallel lines etc. Like you I did wonder if there was an "easy" way to curve things using photoshop, corel draw or something like that.... Hope this helps Richard |
||
posted: 18 Jul 2011 14:17 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Richard_Jones wrote: Like you I did wonder if there was an "easy" way to curve things using photoshop, corel draw or something like that....Hi Richard, Thanks for the idea. I will look at adding such a function to "curve" a picture shape in TDV. It will be slow, or very slow, but you have to do it only once. The image quality will be poor, or very poor, but adequate as a background guide -- similar to the existing twist functions. regards, Martin. |
||
posted: 19 Jul 2011 21:43 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Martin Wynne wrote:Thanks for the idea. I will look at adding such a function to "curve" a picture shape in TDV.Hi Richard, That worked out quite well. I have replied with the details in a previous topic on this same subject: message 9830 Many thanks for the idea. regards, Martin. |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |