Martin Wynne
Admin
- Location
- West of the Severn UK
- Info
.
• Please be aware that Plug Track is still extremely experimental and in continuing development. There are various options you can now tinker about with, but very little which is as yet actually usable on your layout.
@AndyB
A laser cutter is large, expensive, and not very home-friendly.
A CNC-miller/router is much more affordable, for example this one is £240
https://www.amazon.co.uk/dp/B08K95J434/
Use a miller to cut the timbers and sockets in plywood? 1.5mm slot-drills appear to be readily available.
So now we need an option for the Plug Track sockets and chair plugs to have semicircular ends. I'm on the case.
I think AndyB suggested something similar, and I was a bit dismissive. Sorry Andy.
Martin.
• Please be aware that Plug Track is still extremely experimental and in continuing development. There are various options you can now tinker about with, but very little which is as yet actually usable on your layout.
@AndyB
A laser cutter is large, expensive, and not very home-friendly.
A CNC-miller/router is much more affordable, for example this one is £240
https://www.amazon.co.uk/dp/B08K95J434/
Use a miller to cut the timbers and sockets in plywood? 1.5mm slot-drills appear to be readily available.
So now we need an option for the Plug Track sockets and chair plugs to have semicircular ends. I'm on the case.
I think AndyB suggested something similar, and I was a bit dismissive. Sorry Andy.
Martin.
message ref: 2566