Creating a bi-directional Transition Curve?

[polybear]

Hello,

I've been trying to create a transition curve in a template that gradually transitions from a straight template into a curve no tighter than 750mm, then gradually transitions back to straight again; I've tried to do such a thing but can't seem to get the gradual transition back to straight again, despite adjusting the Transition Curve settings every which way I can think of.
Can someone advise what I'm doing wrong please?

Thanks,
Brian

 

[Martin Wynne]

Hello,

I've been trying to create a transition curve in a template that gradually transitions from a straight template into a curve no tighter than 750mm, then gradually transitions back to straight again; I've tried to do such a thing but can't seem to get the gradual transition back to straight again, despite adjusting the Transition Curve settings every which way I can think of.
Can someone advise what I'm doing wrong please?

Thanks,
Brian

@ploybear

hi brian,

that is two transition curves

you can have only one in a single template

do this:

1. create the first transition to the end of the curved section.

2. put the fixing peg on that end.

3. click tools > make mirror on peg menu item.

other members here will be able to explain more. @Steve_Cornford

martin.

 

[polybear]

Hi Martin,

That's excellent - many thanks, I'll give that a go shortly.

It's great to have you back - I hope the paw soon mends.

Now if only you could add an update to make rooms bigger.....

Kind Regards,
Brian