Justme Igor
Member
- Location
- Westwoud The Netherlands
I was playing with the features of 3d in templot.....
WOW @Martin Wynne....My compliments and respect!!!
It looks a lot in the beginning of my 3d endeavors.
There is just one way and that is the correct way.
But you did it again----->perfect.
What I would wish: is that it could separate the switch blades from the main rail so i dont have to cut them.
(if i have my technical English in order (atonomy of the turnout))
I put in a stl file as my experiment, so you will see what kind of "problem" i run into.....
For those that are printing everything this would be/could be a problem.
For me it is just a waste of time, and some keen eye needs to be involved to cut at the precise point.
Between the main rail and the switch blades.
I think you understand my bad English.
I also closed in a link to my thingyverse of some things that i made regarding trackwork....
You will see what i mean that it is like my beginging at printing for model railway.
https://www.thingiverse.com/justmeigor/designs
Apparently i deleted my 3 way switch and my 7 way switch....bummer....(and some other "non-function" project regarding trackwork)
In my stl file the frog is still yours, i am not going to delete it, this saves me much time and i cannot compete with this level of perfection!
3d printer wins.(benchrester rifle against a veteran rifle at 2500 meters to put it in perspective)
I think i will print some (or the whole thing) parts of the turnout, crossovers or whatever, and i will make the rest of azobe wood.
I think i found/this is a perfect way in the middle, thanks again!
With best regards Igor
WOW @Martin Wynne....My compliments and respect!!!
It looks a lot in the beginning of my 3d endeavors.
There is just one way and that is the correct way.
But you did it again----->perfect.
What I would wish: is that it could separate the switch blades from the main rail so i dont have to cut them.
(if i have my technical English in order (atonomy of the turnout))
I put in a stl file as my experiment, so you will see what kind of "problem" i run into.....
For those that are printing everything this would be/could be a problem.
For me it is just a waste of time, and some keen eye needs to be involved to cut at the precise point.
Between the main rail and the switch blades.
I think you understand my bad English.
I also closed in a link to my thingyverse of some things that i made regarding trackwork....
You will see what i mean that it is like my beginging at printing for model railway.
https://www.thingiverse.com/justmeigor/designs
Apparently i deleted my 3 way switch and my 7 way switch....bummer....(and some other "non-function" project regarding trackwork)
In my stl file the frog is still yours, i am not going to delete it, this saves me much time and i cannot compete with this level of perfection!
3d printer wins.(benchrester rifle against a veteran rifle at 2500 meters to put it in perspective)
I think i will print some (or the whole thing) parts of the turnout, crossovers or whatever, and i will make the rest of azobe wood.
I think i found/this is a perfect way in the middle, thanks again!
With best regards Igor
Attachments
message ref: 10481