Construction symbol ID hidden

Paul Boyd

Member
Location
Loughborough, UK
Hi Martin

A small point - on a construction symbol, any platforms (or parapets) can obscure the ID text. There's a numbering over platforms option for timber numbering so I guess the same might be needed for symbol text. The same applies to trackbed edges although timber numbers are on top of those. In the meantime, I've just used a smaller symbol so they don't overlap the platforms!

I'm using the ID text as the wire numbers for droppers, so they do need to be visible on a printout.

Cheers,
Paul
 
_______________
message ref: 1568

Martin Wynne

Admin
Location
West of the Severn UK
Info
Please do not send requests for help direct to me via email.

Post your questions on the forum where everyone can see them and add helpful replies.
@Paul Boyd

Thanks Paul. Sorry about that.

I will look at an option to put the droppers above the rails. Or at least the ID text. The gaps already are.

In the meantime, a fix would be (output menu):

hatched_platforms.png


cheers,

Martin.
 
_______________
message ref: 1570

Martin Wynne

Admin
Location
West of the Severn UK
Info
Please do not send requests for help direct to me via email.

Post your questions on the forum where everyone can see them and add helpful replies.
@Paul Boyd

p.s. Or alternatively Paul, if you are printing solely a wiring record, you could switch off the platforms entirely:

no_platforms.png


cheers,

Martin.
 
_______________
message ref: 1571

Martin Wynne

Admin
Location
West of the Severn UK
Info
Please do not send requests for help direct to me via email.

Post your questions on the forum where everyone can see them and add helpful replies.
@Paul Boyd

Hi Paul,

This is now fixed in 227c. The ID text for the droppers is above the rails and platforms. :)

cheers,

Martin.
 
_______________
message ref: 1577
Top